PAXbaby.com

PAXmommy Brianna is wearing her  47 month,  41″,  36lb daughter Delia and her 17 month, 32″, 26lb daughter Corrina in the same, new Toddler Emeibaby!

http://shop.paxbaby.com/emeibaby/

If you were a fan of the standard/Baby sized Emeibaby, you will fall in love all over again with the new Toddler size!

paxbaby

paxbaby

Whereas the Baby/Standard size Emeibaby fits babies from birth to three, the Toddler is better suited for older babies, from 34″ (around one year) to around four years of age.

Easy to adjust and easy to use – with an Emeibaby you get a perfect fit every time! It combines everything you love about a soft structured carrier, AND a woven wrap in ONE.

As you can see from the diagram, the Toddler size has a longer and wider body panel, a longer hood, and a broader back panel and waistband.

If your toddler was comfortable in the baby size, just think about how much more cozy he will be in the toddler size… with room to grow!! I love that the body panel is so much longer, especially if you have a little leaner!!

Because the wrap is fastened only to the middle portion of the waistband, you can easily bunch the fabric in to get a smaller seat for a smaller toddler, or spread it out nice and wide to get a good wide seat for your bigger child.

Perfect knee to knee coverage and a deep seat every time.

This carrier often intimidates babywearers,  who think that it is a lot more complicated than it really is.

We promise you! It really is THAT simple. No need to adjust every time you wear it either.

Have you found the Emeibaby love yet??

paxbaby

*happy babywearing*

paxbaby

The post Emeibaby Toddler appeared first on PAXbaby.

What IS a WCRS:

A wrap conversion ring sling, is a piece of woven wrap cut, hemmed, and sewn into a custom ring sling.

Why go with a WCRS over a regular ring sling?:

With a wrap conversion, you get the added support of a woven wrap, with the ease of a ring sling.

What exactly does “slingified” mean?:

We use the term slingified, when we refer to sending a cut piece of woven wrap over to either Zanytoes, Sleeping Baby Productions, or Kalea Baby to be sewn into a ring sling.

A good wrap conversion ring sling (WCRS), is the perfect addition to any babywearer’s stash.

Small enough to fold up and tuck into any bag or purse, easy to use, and great for all sizes.

Let’s take a closer look at two of the “slingifiers” that we, at PAXbaby.com, have partnered up with.

PAXbaby.com

Paxbaby.com

Kalea Baby:

Sizing:

Small/Medium: 76″

Medium/Large:  80″

Shoulder: Pleated/gathered hybrid

Can be worn on either shoulder?: Yes.

How much wrap is needed?:  The Kalea shoulder needs 4.5″-5″ to create, so be sure to factor that number in.

paxbaby.com

paxbaby.com

ypaxbab.com

Zanytoes:

Sizing:

Small: 68″

Medium: 74″

Large: 80″

Shoulder: Pleated & Gathered

Can be worn on either shoulder: No. Please specify which shoulder.

“The Zanytoes standard shoulder is a wide gathered shoulder that can be spread wide across your shoulder and upper arm, or ‘scrunched’ for a custom fit. We also offer a symmetrical pleated shoulder for a narrower and more structured fit. You might prefer this option if you are petite.”

Which ring sling piece have you been drooling over:

http://shop.paxbaby.com/wrap-conversion-ring-sling-piece

Step #1: Choose your wrap

Step #2:  Choose your length

Step #3:  Check out at PAXbaby.com

Step #4:  Check out at Zanytoes or Kalea Baby with the SAME NAME you used at PAXbaby.com for simplification.

Step #5: Wear your baby happily ever after

See how versatile a WCRS can be, and fall in love with babywearing all over again!

paxbaby.com

*happy babywearing*

paxbaby.com

The post A Closer Look at Getting a WCRS. appeared first on PAXbaby.

paxbaby

THIS COULD BE YOU!

Do you have two or more of the buckle carriers that PAXbaby.com sells?

If so, please contact us about a blog opportunity!!!!

We are looking for comparisons, action shots, and real life feedback from babywearers all over the world!

Email us via help@PAXbaby.com so we can chat about this fun opportunity! THANK YOU!

http://shop.paxbaby.com/buckle-carriers/

This is a great way to get real-life reviews from YOU, and see exactly what you LOVE about your soft structured carrier and how it may or may not differ from another!

** THANK YOU, Keri, for this adorable babywearing family photo**

paxbaby

*happy babywearing*

paxbaby

The post ISO Fan Reviews appeared first on PAXbaby.

paxbaby

The Soleil is here, and boy, does it have people talking!

Everyone wants to know the dirt, so we are working on a few extra-special upcoming Beco blog posts dishing the goods on this brand new carrier.

Here’s a great chart that compares and contrasts PAXbaby.com‘s Beco Baby Carriers!

The Soleil versus the Gemini is a tough choice.

 It comes down to so much more than looks with this carrier, definitely weighing out the pros and cons is necessary. Wait, cons… what cons? haha

Things to consider:

How old is your baby?
How heavy is he/she?
Will this be your only carrier?
Will you be needing an infant insert?

If  you need some assistance deciding which buckle carrier will be perfect for your babywearing needs, feel free to email us!

help@PAXbaby.com

http://shop.paxbaby.com/beco/

paxbaby

*happy babywearing*

paxbaby

The post Beco Gemini vs. Soleil Part 1: appeared first on PAXbaby.

Angel Pack versus Tula

Still on the fence?

Need a closer look at the similarities AND the differences?

In the photos below we have Angel Pack on top of Tula:

paxbaby

PAXbaby: Angel Pack vs Tula

paxbaby

paxbaby

Still confused?

Why not email the PAXmommies for a babywearing prescription:

help@paxbaby.com

*happy babywearing*

The post A closer look at Angel Pack vs. Tula appeared first on PAXbaby.

paxbaby

Ever wish that you could compare two awesome PAXbaby.com carriers side by side BEFORE, purchasing to see which one would be the best fit for you and your little one?

Either way you are going to have a super-amazing wrap conversion carrier, but let’s break down the nitty gritty for everyone.

paxbaby

PAXbaby’s

Angel Pack versus.  Tula:

paxbaby

paxbaby

• Height of carrier from tip to waistband top
  Angel Pack = 18″  Tula = 15″
• Depth of waistband at center
• Angel Pack = 4 1/4″  Tula = 5
• Maximum length of shoulder strap
• Angel Pack  = 42″  Tula = 43″
• Length of padded shoulder strap
  Angel Pack = 19″  Tula = 20″
• Angel Pack = straight CROSSABLE shoulder straps
  Tula = curved FIXED strap straps

• Width of front panel at shoulder strap
• Angel Pack = 15″  Tula = 16″
• Width of front panel at waistband
  Angel Pack  = 12 1/4″  Tula = 12 1/4″
• Waist strap cinches down to
  Angel Pack = 30″ Tula = 29″
• Waist strap extends to
  Angel Pack = 52″  Tula = 53″
• Width of shoulder straps                                                                                          Angel Pack= 3.3/4″thick                                                                                                                                       Tula= 3.5″ish thick

paxbaby

paxbaby

*happy babywearing*

The post ANGEL PACK vs. TULA appeared first on PAXbaby.

A quick low down on PAXbaby’s favs :

The Beco Butterfly is our hands down favorite carrier for most any baby and any parent!  Complete with all the bells & whistles, the Butterfly features an internal harness, infant insert, sleeping hood, and can carry babies from newborn through 45 pounds!  Perfect for warm weather babywearing due to the internal Y panel, and featuring a huge selection of prints, PAXbaby ? the Beco Butterfly!

The Beco Gemini is Beco’s other buckle carrier, and it is a throw back to an earlier Beco model that was well-loved!  Front carries, front facing out also, on the hip, or as a back carrier, the Gemini does not have the sleeping hood or infant insert and internal harness like its older sister, the Butterfly, but has a more streamlined look with a folding headrest and body that can become smaller for petite babies or front facing out.  Keep in mind that if your goal is to find a carrier to wear your infant now through kindergarten, the Gemini can only hold 35 pounds, but it features more wearing positions than the Butterfly!.

BabyHawk’s Oh Snap! is a favorite at PAXbaby due to the comfortable padding in the waistband and shoulder straps, the seat darts designed for toddlers, and the cutting edge style.  The Oh Snap! is not intended to be used for carrying young babies so start thinking about the smooth ride of the Oh Snap! around baby’s first birthday, and if you are larger proportioned!

Specially designed for toddlers, the Boba Baby Carrier 3G features a removable hood and also removable foot stirrups for your child’s ergonomic positioning.  Comfortable for both baby and parent, from infancy through toddlerhood, the Boba is PAXdaddy’s go-to carrier for our toddlers!

Want a baby carrier that will earn you the prize at the fashion show?  Olives & Applesauce soft structured carriers, or “O & A” as we affectionately call them, are just gorgeous with the attached hood, wide waistband, and curved shoulder straps.  The contour of the shoulder straps means you can back carry without using the chest strap – eliminating “babywearer’s cleavage!”  These baby carriers are 16″ tall and have the new perk of a baby insert built within the O & A, for babies or toddlers up to 30 pounds!  If you are carrying extra baby weight, THIS is the buckle carrier for you!!

Scootababy is the one and only HIP carrier that we adore! It can actually be used on the front or back, but it shines as a hip carrier!  Super comfortable with a supportive waistband and soft fleece shoulder strap, the Scootababy is easy to nurse in and attractive to dads with its sleek design.

Last but not least, I can truly say that MOST parents who try the Tula, fall in love immediately and never look back!  Made in Poland with a very thorough eye for design, the Tula has been a local favorite for years and is now gaining momentum across the country and the WORLD!  Pocket, hood, comfort, the Tula is basic but thorough!  The Manduca is another favorite, but not as easily accessible to us in the USA!!!!

The post The SSC appeared first on PAXbaby.

Most babywearers are introduced to babywearing with the uninspired big box “crotch dangler” style of baby carriers –  the Infantino, the Bjorn, the Chicco – and most babyworn babies are indoctrinated to their babywearing career by being subject to the unsupported and uncomfortable method of FFO (Front Facing Out!)  With these mass produced baby carriers being so common, most civilians don’t bat an eye at a newborn drooping pitifully from its new mother’s baby harness with its wee arms extended over the front flap and its legs in an unnatural & flaccid sag.  Most admire baby’s hair, or lack of hair, or sweet outfit, or cute hat, but what we babywearers know with every babywearing bone in our body is that these carriers are not good for our babies!  They don’t support – they suspend!  They don’t cradle – they dangle!  They don’t hold – they hang!  As a friend of mine says, Friends don’t let friends FFO!

PAXbaby.com

PAXbaby.com

Front Facing Out is not a popular way to wear your baby in the stricter world of babywearing, however I’d like to point out that there is always the exception to the rule!  I have a handful of exceptions in which case a baby carrier with FFO capability is invaluable!  I was thrilled when Beco introduced to the babywearing population the Beco Gemini which features the ability to forward face because not only will that option lure in the unsuspecting parent who would usually buy a Bjorn but the Beco is “so much cuter,” but the Gemini also allows me to use an organic, Made in the USA, ergonomic carrier in a FFO position without needing to own a “crotch dangler”!!!  These circumstances happen very rarely, but when they do, I’m grateful for my Gemini!

PAXbaby.com

FFO circumstance #1 – Sitting to view a sibling’s class or play.  You need to be able to sit back so you can’t have baby on your back!  Baby wants to see the happenings as well!  FFO your baby so that they can interact with the world but be very observant of their signals to you of discomfort or overstimulation and limit their FFO time to about 10 minutes at a time!

PAXbaby.com

FFO circumstance #2 – Wearing an older baby while they are eating.  I can clearly remember the first time I wore my Gemini to Disneyland!  When Baby #5 got hungry and PAXdaddy handed him a messy granola bar, I simply turned him around and all the crumbs went cascading onto the ground outside Pirates of the Caribbean instead of down my cleavage!  What a relief and easy clean up that made!  These days we can use a custom Flat Hat to act like a bib to protect the Gemini itself as well!  Urge baby to finish up quickly because wearing an older baby with his spine against you is NOT going to feel good after a while and certainly is not ergonomic for babywearing participant!

PAXbaby.com

FFO circumstance #3 – Wearing a baby who wants to be included in a craft!!!  Crafting with children is always a challenge, but add into that messy mix a baby who wants to be involved, and you have a recipe for disaster!  Luckily, by inviting baby to help while being worn lessens the catastrophic demise that usually occurs when baby “helps!”  Strap baby onto your front and put in his arms reach harmless tools that will help him create his masterpiece without damaging your crafting area permanently!  In our case this past week, the kids & I were making a Christmas surprise for the PAXdaddy!  Every year, we make him something with their hand prints, and this year, a friend inspired me to help the kids create Homemade Salt Dough Ornaments featuring their very own paw prints!!!  Of course we couldn’t leave out Baby #6, so into the Beco Gemini he went, and we imprinted his very own ornament with his tiny hand print!

PAXbaby.com

THANKS for reading, and keeping an open mind when you first read the blog post title!!!  Remember, the main purpose of babywearing is to bond with your baby and remain available to them as they grow so if you need to fudge the rules once in a while, I understand!  I’ve been there & done that, and have made the decision to FFO with a happy baby then try to back carry with a screaming one!  Let baby participate, and you will be a better babywearing team for it!

PAXbaby

Homemade Salt-Dough Ornaments

PAXbaby.com

Ingredients & tools needed:

• 4 Cups Flour
• 1 Cup Salt
• 1 1/2 Cups of water
• Rolling Pin
• Parchement Paper
• Cookie Cutters
• Toothpick
• Ribbon
• Acrylic paints

PAXbaby.com
Instructions:

1) Pre-heat oven to 300 degrees F.

2) Prepare your cookie sheets by lining with Parchment Paper.

3) Mix Flour, Salt and Water together. The dough will be sticky at first.   If it’s crumbly, add a little bit more water. If it’s too sticky, add a bit more flour.

4) Knead the dough by hand or use your mixer for  25 minutes. This will eliminate “most” of the air bubbles.

5) Roll the the dough out to about 1/4 of an inch thick.

6) Use cookie cutters to make desired shape, or trace a bowl like we did!  Place cut-outs on the cookie sheet. Don’t forget to make a hole for hanging!  We used the end of a glass straw to make uniform holes in each ornament.

7)  Press baby’s hand firmly into the dough, or use their fingertips to mark the small ornaments.

8 )  IMPORTANT: Salt-dough has a tendency to “bubble”, which will cause the ornament to crack. To help prevent bubbling, take a toothpick and lightly poke tiny random holes all over the ornament or in a creative pattern. This will help release the air.  The holes may be noticeable so make ’em pretty. Once the ornaments come out of the oven you can poke holes on the bottom as well to release some of the trapped air as well. This may help prevent them from cracking in the future.

9) Bake in the oven for 20-25 minutes or until they are a very light golden brown on the bottom. Keep a close eye on them, because they can burn quickly!

10) Take the ornaments out from the oven and let them cool.

11) Paint them!!!

12) Give them to your loved ones & hang on your tree!

PAXbaby.com

Hope you have a wonderful time crafting with your little ones, and feel free to use this recipe!  It was given to me by Andrea!!!

PAXbaby.com

*happy babywearing*

PAXbaby.com

The post FFO situations! appeared first on PAXbaby.

The Beco Gemini is on the LEFT, and the Beco Butterfly is on the RIGHT.

There is the option of crossing the shoulder straps with the Gemini which is a throw back feature to the Beco 4th Generation.  For nursing mothers, this option provides the perfect environment to discretely nurse your baby, and for front carries, the X straps can distribute baby’s weight much more comfortably than the backpack style straps.  Thanks to the buckle on each side of the front panel, each shoulder strap can be unclipped and refastened into the X position or a hip carry position.

Ready to order?  Shop here at the Gemini *pre-order*
$139.00

The post It’s a STAR! appeared first on PAXbaby.

As Beco Baby Carrier’s #1 fan, PAXbaby couldn’t be more excited about the newest Beco edition!  Following in the footsteps of the beloved 4th Generation and the Butterfly I and II, the Gemini promises to be everything that a modern mom would dream of!  Fabulous designer fabrics, maximum comfort for parent and child,  ease of use, and that extra special Beco flair that makes Beco Baby Carriers my FAVORITE baby carrier! If you are interested in the differences between the Butterfly and the Gemini, please read my detailed blog post comparing the 2 Beco carriers!

I can’t tell you any more than this: The Gemini is wonderful, elegant, and you won’t be disappointed!    Are you excited?  I thought you would be!  So while you are waiting ever so patiently you can decide what to do about the new Gemini!  Here are some options:
Since your husband already told you “no more baby carriers,”  why not “borrow” the Gemini to see what you think!  Then, if you love it and have to have it, you can work out the details later with the man of the house!

Sign up for the Traveling Gemini, a Beco Gemini will start here with the PAXbaby mama and then will begin its National tour delighting babywearers across the USA!

Or simply buy a Gemini for yourself and enjoy the Beco goodness with your very own Gemini baby carrier!  Remember, if you don’t absolutely love it, you have 90 days to return your Gemini to PAXbaby for a refund or an exchange!

I can’t tell you when exactly the Gemini will make its appearance, but I am about to burst with the surprise, so stay tuned!

This is an early Gemini prototype, worn with my 10 month old last September!

And new action shots from Katie and her 30 pound toddler!

And a very early prototype demonstrating the front facing out capability

*happy babywearing*

The post Gemini Info appeared first on PAXbaby.

Since PAXbaby tried on the Gemini in September, there have been changes made to the carrier especially pertaining to safety.  We can tell you the differences between the Gemini and the Butterfly, but please keep in mind that things may have been updated and will be different on the final version.

While the Beco Butterfly straps are threaded through buckles under the arms, the Gemini has buckles that easily unclip and re-fasten across the back in an X pattern giving more options for front carries and better support for mama’s back.  The body of the Gemini is more narrow than the Butterfly and has a contoured thick headrest similar to the popular Bjorn.  The new carrier is geared more towards accommodating smaller babies and may not feature an internal harness or seat like the Butterfly I  and II have.

For die-hard Beco fans like myself, the wait is hard, but I know that when the Gemini is finally released, it will be a superb carrier with that special Beco flair that we all love and adore!  Let’s all wait as patiently as we can so that Beco can concentrate on perfecting the Gemini for us.  As soon as we know anything new, we will be sure to let you know!

These pictures were taken at Vegas in September with my 10 month old!

The post Beco Gemini update appeared first on PAXbaby.

To make things easier, here are a couple of acronyms that we will use (repeatedly!) in this post:

BH = Babyhawk

OS = Oh Snap!

SSC = Soft Structured Carrier, meaning a meh dai style body with shorter straps that buckle instead of tie and a padded waistband

O&A = Olives & Applesauce

FB = Full Buckle

DH = Dear Husband

If you have any questions, please let us know!

We have the Oh Snap! SSCs in stock or available to order as customs, and the O & As are just getting finished up over at O & A headquarters, and we are taking pre-orders on them now!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

My overall impression is that these are different enough carriers that you could definitely have one of each in your stash. Before I had the BHOS I was in love with my O&A’s and I still am. They are beautiful carriers and very comfy. I do however find the BHOS a bit more comfy for me. I love all the adjustments.  I can get a great fit, DH can get a great fit, and we can cinch it down super tiny for the smaller kids. If you’re passing it among very differently sized people, constant adjustment may be a PITB. Once you figure out the right adjustment for you though, it is easy to use.

Babyhawk Oh Snap! SSC is on the left.  Olives & Applesauce 16 inch FB SSC is on the right.  The strap fabrics are different, but in some of these pictures, they look alike.

———————————————————————————————————————

The O&A on top of BHOS. You can see here how the body of the O&A is slightly curvy and contoured. The BHOS is pretty much straight up and down. They both have leg padding, but the O&A is fluffier.

———————————————————————————————————————

The headrest of the OS can be folded down. It is tricky to fold it down in a back carry, and you probably would need a friend to do it for you. It does not have a seat insert. Our four month old is on the small side for what is recommended with any SSC (which is 4-6 months usually) but we used SSC’s with our older son from about 3 months on. We froggied his legs inside, then moved to one leg out and then finally to two legs out, you could also use a receiving blanket inside the bottom to get him seated a bit higher in the carrier if you want.

Up close picture of the waist padding. The O&A is more curved. The BHOS is also curved but because of the adjusters (mine are all the way out) you could make it more curved or less curved. OS has slightly wider webbing here.

———————————————————————————————————————

The BHOS headrest is great because my son can see out the sides, and when he puts his arms out, there is no scrunching of the body.  The back of the headrest comes up high enough to support him during a nap. I still need to bounce him down and into the carrier once he falls asleep, but I like the way the BHOS feels…it is a very comfy carrier.

Both carriers have seat darts. The seat darts on the BHOS are just not as deep as the O&A, so they are hard to see, but they are there.  On the left is the BHOS, on the right is the O&A.  The O&A has a bit of a trough by the waist band, and the BHOS is less deep.

———————————————————————————————————————

A couple of things in this picture. You can see the differences in the width of the straps.  The BHOS are slightly curved. O&A are straight. O&A has wider webbing than the BHOS. The chest straps are very different. The O&A chest strap is free floating. The BHOS chest strap is fixed but removable. There is adjustable webbing on the BHOS that allows petite users to shorten the straps past the padding (mine are all the way out here).

———————————————————————————————————————

The BHOS waistband padding is 4 inches wide.  The body is 17 inches tall for a total height of 21 inches

The O&A waistband padding is 3 3/4. The body is 16 inches tall for a total of 19 3/4 inches. With the hood up it is 30 inches.

Shoulder padding. O&A on top.  O&A straps are wider with less padding. BHOS are narrower with more padding (though I think as the BHOS breaks in, it will get a little more floppy)

Really, I think everyone should give the OS a try. I went back and forth on them for a while thinking that I was happy with my O&A’s and I wasn’t going to rock the boat trying a bunch of new things, but I finally caved and I am really glad I did. It does feel different than the O&A which I still love, but for a back carry napper who hates hoods, the BHOS is really great. We have been using it for naps and I really am loving it. The 16 inch O&A is a great size and definitely works for a toddler!

The post Comparing the Oh Snap! to the new Olives & Applesauce SSC! appeared first on PAXbaby.

.

.

*happy babywearing*

The post Soft-Structured Carrier Comparison Matrix appeared first on PAXbaby.

Here is the Mai Tei on top of the Oh Snap! Note the wider & taller body of the Oh Snap! and the angle of the straps!

Babyhawk Mai Tei and Oh Snap! comparison

Back carry with the Oh Snap! & 40 pound 2 1/2 year old!

Back carry with the Oh Snap!

Front carry with the Oh Snap! & 17 pound 8 month old!

Oh Snap! front carry

The post Babyhawk standard Mai Tei VERSUS the new Oh Snap! appeared first on PAXbaby.