PAXbaby-Proper fit for your ONBU

PAXbaby.com

So, you are curious about Tallulah Baby Carries amazing onbus??

Check out their size guide:

Onbu sizing:

Baby: sitting up unassisted – 24 months

Toddler: 18 months – 3T

Toddler Plus: 2T – 45 lbs

All three carriers are weight testes from 15-45lb

Specifications:

Baby: Seat width 15.5″, panel height 20.25″

Toddler: Seat width 17.5″, panel height 23.75″

Toddler Plus: Seat width 19.5″, panel height 26.75″

Adjustable shoulder straps: Approximately 12″-17″ with additional 21.5″ of webbing.

Weight: Approximately 1.25 lbs

paxbaby

Always make sure that the carrier is adjusted so that it is comfortable for both the baby and the wearer.
Make sure to use assistance of a spotter until you are comfortable putting on and adjusting the onbu by yourself.
An onbu requires some prior carrier experience since it is a more advanced carrier.
Onbus are ONLY for children who are able to sit up without assistance for extended periods of time.
It is very important to have a proper fit due to the large side openings, as they could be an increased fall hazard.
Please choose the correct size when ordering.
The carrier should fit the child’s current size and not a size that the child will grow into.
The proper fit would be for the panel to fit from the child’s armpits down and back around the bum.
The inside edge of the panel should stop at the child’s bellybutton to ensure there is an appropriate seat.
Onbus can be worn with arms in or out, but it’s best for the arms to be out while putting on the carrier to reduce the risk of falling.
These carriers are designed to be worn high and tight, and can be worn on the front or back of the caregiver.
If the fit is not correct, it will be uncomfortable by putting too much strain on the shoulders of the wearer.

paxbaby

paxbaby

Proper fit for your ONBU